Omega Technologies Inc.
Office Hours:
Monday - Friday 7:30AM - 4:00PM PST
Phone:
800-888-4005
818-264-7970
Fax:
818-264-1414
Address:
31125 Via Colinas Suite 905
Westlake Village, CA 91362
General Email:
helpdesk@omegatec.com
Request A Quote:
quotes@omegatec.com
Minimum Order:
We require a minimum order amount of $50.00
|
M-10MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
|
Apex Part Number: M-10MM43
Apex Bits Distributor: Apex From Cooper Tools
|
Apex 3/8'' square drive magnetic metric sockets, thin wall, standard length, 6 point square drive opening.
Hex Opening: 10mm Overall Length: 31.7mm Diameter Nose End: 15.1mm Diameter Drive End: 19.1mm Opening Depth: 6.4mm
Thin wall sockets accommodate countersunk or limited clearance nut or bolt locations. Many of these sockets have a shouldered body design that can fit in tight quarters. Apex sockets have hex tolerances that are on average 48% tighter than DIN and 35% tighter than ANSI requirements. With Apex you are assured of an exact, sure fit. All Apex sockets have the tightest tolerances for straightness and concentricity in the industry. Magnetic sockets hold the fastener in driving position, even when working straight down. Time-wasting motions are eliminated when starting fasteners or working in hard-to-reach areas. These sockets are identified with a M- prefix. High strength fasteners in demanding situations, like those found in the automotive and aviation industries, often require the use of an impact wrench or impact driver to deliver the amount of torque required to tighten or loosen them. Apex impact sockets are specifically designed and manufactured for high impact use, and made from a tougher and more ductile alloy steel which is then heat treated for extra durability. Apex Catalog Page Number: 45 Made In The USA
|
Products Similar To M-10MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
M-8MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
Apex Part Number: M-8MM43
Apex 3/8'' square drive magnetic metric sockets, thin wall, standard length, 6 point square drive opening. Hex Opening: 8mm Overall Length: 31.7mm Diameter Nose End: 12.7mm Diameter Drive End: 19.1mm Opening Depth: 4.8mm
|
M-10MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
Apex Part Number: M-10MM43
Apex 3/8'' square drive magnetic metric sockets, thin wall, standard length, 6 point square drive opening. Hex Opening: 10mm Overall Length: 31.7mm Diameter Nose End: 15.1mm Diameter Drive End: 19.1mm Opening Depth: 6.4mm
|
M-12MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
Apex Part Number: M-12MM43
Apex 3/8'' square drive magnetic metric sockets, thin wall, standard length, 6 point square drive opening. Hex Opening: 12mm Overall Length: 38.1mm Diameter Nose End: 17.5mm Diameter Drive End: 19.1mm Opening Depth: 7.2mm
|
M-13MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
Apex Part Number: M-13MM43
Apex 3/8'' square drive magnetic metric sockets, thin wall, standard length, 6 point square drive opening. Hex Opening: 13mm Overall Length: 38.1mm Diameter Nose End: 19.1mm Diameter Drive End: 19.1mm Opening Depth: 8.7mm
|
M-14MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
Apex Part Number: M-14MM43
Apex 3/8'' square drive magnetic metric sockets, thin wall, standard length, 6 point square drive opening. Hex Opening: 14mm Overall Length: 38.1mm Diameter Nose End: 19.8mm Diameter Drive End: 20.6mm Opening Depth: 11.1mm
|
M-15MM43 Apex 3/8'' Square Drive Socket, Metric, Thin Wall, Standard Length
Apex Part Number: M-15MM43
Apex 3/8'' square drive magnetic metric sockets, thin wall, standard length, 6 point square drive opening. Hex Opening: 15mm Overall Length: 38.1mm Diameter Nose End: 20.5mm Diameter Drive End: 20.6mm Opening Depth: 11.1mm
|
|
|